Currently Empty: Rp0.00
Thermal Design of Shell and Tube Heat Exchangers
0% Completed
Join Grup
01 – Introduction, Scope & Capability Heat Exchanger Software
01.01. Overview Shell and Tube Heat Exchanger
Video - 00:08:58 mins
01.02. Pengenalan Heat Exchanger Software
Video - 00:10:57 mins
01.03. Rating versus Design Heat Exchanger Software
Video - 00:07:22 mins
01.04. Step Thermal Design
Video - 00:09:32 mins
01.05. Perbedaan Rating, Design, & Simulation
Video - 00:10:30 mins
01.06. Input Komponen
Video - 00:05:54 mins
01.07. STHE Geometry Heat Exchanger Software
Video - 00:10:19 mins
01.08. Input Notification & Runtime Messages
Video - 00:06:13 mins
01.09. Quiz Bagian 1
Video - 00:00 mins
02 – Simulasi Real Case STHE di Heat Exchanger Software
02.01. Diskripsi Real Case STHE
Video - 00:18:22 mins
02.02. Kondisi Proses dan Unit Set di Heat Exchanger Software
Video - 00:11:28 mins
02.03. Hot & Cold Fluid Properties Set di Heat Exchanger Software
Video - 00:13:36 mins
02.04. Exchanger Geometry Set di Heat Exchanger Software
Video - 00:08:44 mins
02.05. Tube Geometry Set di Heat Exchanger Software
Video - 00:06:07 mins
02.06. Buffle, Nozzle & Tube Layout Geometry
Video - 00:07:02 mins
02.07. Report di Heat Exchanger Software
Video - 00:04:09 mins
02.08. Quiz Bagian 2
Video - 00:00 mins
02.09. Project 1
Video - 00:03:18 mins
03 – Optimization of Preliminary Design
03.01. Tie Rods & Impingments
Video - 00:07:37 mins
03.02. Tube TEMA
Video - 00:12:59 mins
03.03. Shell Side, Buffle, Exchanger Criteria TEMA
Video - 00:11:35 mins
03.04. Fluid Velocity Criteria TEMA
Video - 00:08:33 mins
03.05. Optimasi STHE Part 1
Video - 00:27:08 mins
03.06. Optimasi STHE Part 2 & Plugging
Video - 00:07:47 mins
03.07. Quiz Bagian 3
Video - 00:00 mins
04 – Rating STHE using Heat Exchanger Software
04.01. Diskripsi Kasus STHE
Video - 00:10:22 mins
04.02. Simulasi Kasus Nyata Part 1
Video - 00:35:58 mins
04.03. Sumulasi Kasus Nyata Part 2
Video - 00:07:07 mins
04.04. Plugging Simullation
Video - 00:10:54 mins
04.05. Monitoring Performa HE
Video - 00:14:07 mins
04.06. Quiz Bagian 4
Video - 00:00 mins
04.07. Project 2
Video - 00:02:58 mins
Finish Course Early?
You have not completed all required lessons and assessments.
Your Progress
0%